Products
Product Name:Shape abrasives
Technical Data
The ratio between abrasive and the work piece, and the size of the abrasive
|
Abrasive application
|
|||
Outer form of the work piece
|
Abrasive shape
|
Ratio between abrasive and work piece
|
Different kinds of abrasive
|
Main application
|
Arc surface
|
Ball, cylinder shape, the radius of the ball should be less than radius of the work piece arc surface
|
Rough abrasive 2:1-3:1
medium and fine abrasive3:1-5:1
|
Rough abrasive
|
Very high efficient in remove flash, bur, oxidation, rust and scratch, etc.
|
Flat surface
Dishware and knife tool
|
Ball, triangle, tilt cylinder, square parts should be larger than abrasive by one times
|
Rough abrasive 2:1-3:1
medium and fine abrasive3:1-5:1
|
medium abrasive
|
Remove small bur, flash, and light scratch of the metal and nonmetal parts, and can also used for medium abrasive after rough abrasive.
|
Rigid part
|
The abrasive can be different shape, but it should be bigger than work piece, this can improve the efficiency and easy to sort out.
|
Rough abrasive 2:1-3:1
medium and fine abrasive4:1-6:1
|
Fine abrasive
|
Used for rough abrasion and one-time fine abrasion and polishing of the part
|
|
For the small parts, smaller abrasive should be used, normally round, cylinder and square.
|
Rough abrasive 2:1-3:1
medium and fine abrasive4:1-6:1
|
Super fine abrasive
|
Used to super fine polishing of the metal or nonmetal parts
|
With hole and trough
|
If the parts are trough with hole, the abrasive should be smaller than 1/3 of the hole to prevent block; meanwhile, the round, tilt cylinder and triangle abrasive shall be used to remove the bur, and the abrasive should be larger than trough by 1/3 and 2/5.
|
Rough abrasive 2:1-3:1
medium and fine abrasive3:1-5:1
|
Resin abrasive
|
Rough, medium, fine abrasion, bur removal and polishing of the soft metal, such as aluminum, zinc and copper alloy
|
Threaded part
|
The abrasive should be round, cone to protect screw thread from bruising and deformation.
|
3:1-5:1
|
High aluminum porcelain abrasive
|
Compact and anti-abrasive, can be used for fine abrasion of all kinds of work piece, and improve surface fineness and brightness
|
|
Note: The technical data of the abrasive can be decided in accordance with the requirement of the customer, such as shape, material and quantity, etc.
|
Note: All the pictures or parameters are only for reference, if you want to buy, please go to our finished products.
◎ Other products